Atlantic 507515 Manual Del Usuario página 33

If you so desire, you can modify
the temperature displayed by
pressing on or
temperature flashes. Press again
on or (D) to make the
temperature change.
GOING AWAY MORE THAN 48 HOURS: USE OF THE FROST FREE MODE
To activate the Frost Free mode
, press several times on
until the cursor is on the Frost free
mode .
PROGRAMME YOUR HEATING PERIOD: USE INTERNAL PROGRAMMING MODE
Before setting the programming, the timing must be set on the radiator or you must make sure that it is already
at the right day and time.
You can program your Comfort temperature periods
programmes.
5 programmes are preset: P1, P2, P3, P4 and P5 and cannot be modified.
0h 1h 2h 3h 4h
P1
P2
P3
P4
P5
P1 is preset for constant presence, for example over the weekend (ECO mode from 0 h to 10 h, Comfort mode
from 10 h to 0 h).
P2 is preset if you are absent during the day (ECO mode from 0 h to 6 h and from 9 h to 17 h, Comfort mode
from 5 h to 9 h and from 17 h to 23 h).
P3 is preset if you are absent during the day, but that you come home at noon (ECO mode from 23 h to 5 h, from
9 h to 12 h and from 14 h to 17 h, Comfort mode from 5 h to 9 h, from 12 h to 14 h and from 17 h to 23 h).
P4 Permanent comfort.
P5 Permanent Eco.
32
How to modify the desired temperature?
(D), the
(C)
Description
5h 6h 7h 8h 9h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h
After 5s of non-activity, the ECO
temperature
validated.
The Frost Free temperature
preset to 7° C (±3° C) and cannot
be modified.
and ECO periods by using one of the 5 preset
is automatically
is