Kärcher SC 4 Deluxe Manual Del Usuario página 11

Warranty
The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Symbols on the device
(according to type of appliance)
Risk of burns, surface of appliance be-
comes hot during operation
Risk of scalding from steam
Read operating instructions
Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure regulator and the boiler thermo-
stat fail and the unit overheats, the safety thermostat
switches the unit off. Before resetting of the safety ther-
mostat, contact the responsible KÄRCHER Customer
Service.
Boiler thermostat
The boiler thermostat switches off the heating in the
event of a fault; for example, if there is no water in the
steam boiler and the temperature in the steam boiler ris-
es.
As soon as you refill the water, the device is ready for
use again.
Maintenance lock
The maintenance lock seals the steam boiler from the
steam pressure present. The maintenance cap is also a
pressure relief valve. If the pressure regulator is defec-
tive and the steam pressure in the steam boiler rises,
the pressure relief valve opens and steam is escapes
through the lock.
Prior to restarting the device, contact the responsible
KÄRCHER Customer Service.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
LED lights
1
Selector switch
2
Accessory storage area
3
Carrying handle
4
Water reservoir
5
Main connection cable with main plug
6
Display - OFF position
7
Min. steam stage
8
Med. steam stage
9
Max. steam stage
10
Maintenance lock
11
Park bracket for floor nozzle
12
Steering roller
13
Steam gun
14
Steam lever
15
Unlocking button
16
Child lock
17
Steam hose
18
Spotlight nozzle
19
Round brush (small)
20
**Round brush (large)
21
**Power nozzle
22
Crevice brush
23
Manual nozzle
24
Manual nozzle microfibre cover
25
Extension tubes (2 x)
26
Unlocking button
27
Floor nozzle
28
Hook and loop fastener
29
Microfibre floor cloth (1 x)
30
**Microfibre floor cloth (2 x)
31
**Carpet glider
32
Descaler
33
**optional
Installation
Installing accessories
1. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration F
2. Push the open end of the accessory onto the spot-
light nozzle.
Illustration G
3. Connect the extension tubes with the steam gun.