eufy Security S100 Manual De Usuario página 4

INSTALLATION
To avoid the risk of shock, injury, or death, always
be cautious when working with electricity. Hire a
professional electrician if you're uncomfortable
working with electrical wiring.
1. Turn off the circuit breaker of your home. Turn the lights on and off to check the electricity
in your home is properly turned off.
OFF
2. Select a location for the device and mark it.
For the best motion detection experience, install the device between 1.8m and 2m above the ground.
Do not install the device more than 2.2m above the ground.
4 EN
OFF
1.8m~2m
3. If no wires exist, run wires to the installation location. Next, screw the mounting bracket
onto the wall.
• On wooden walls, do not pre-drill holes. Use the screws provided to fix the mounting
bracket onto the wall.
• For walls made of hard materials, such as stucco, brick, or concrete, pre-drill holes in the
required locations, insert the provided anchors, and then use the provided screws to fix the
mounting bracket to the wall.
4. Loosen the wire screws, insert the neutral, ground, and live wires into the connectors, and
then tighten the wire screws to thoroughly secure the wires.
① ②
North America Europe
Ground Green / Yellow Green / Yellow
Neutral White Blue
Live Black Brown
(optional)
③
Ground
Neutral
Live
The wire colors vary depending on
region.
EN 5