Publicidad
Idiomas disponibles
Idiomas disponibles
EN
English (Original instructions)
CEILING FAN
FRESKO 3B PURE ULTRA SILENCE
FRESKO 3B ULTRA SILENCE
DESCRIPTION
A Ceiling bracket
B Body
C Long / Short suspension tube
D Lamp cover
E LED light
F Remote control receiver
G Blades
H Remote control
I Remote control support set
J Balancing clip
K Balancing weight
REMOTE CONTROL
1 Speed selector (1/2/3/4/5/6)
2 Fan on/off button
3 Rotation direction change
4 Timer buttons 1/2/4/8 hours
5 Light On/off button
6 Night Mode
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE:
• Do not use the appliance if the on/off button does not
work.
• Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
INSTRUCTIONS FOR USE
BEFORE USE:
• Be sure to remove all packaging material from inside the
appliance.
• Please read the "Safety advice and warnings" booklet
carefully before first use.
FAN INSTALLATION
• See "FAN INSTALLATION" at the beginning of the
instruction manual.
IMPORTANT: In the package, you will find the material for
fixing the bracket to the ceiling (Wood and Concrete). This
material is not suitable depending on what type of roof. If
any doubts, ask a professional and use the fixing that you
think are the most suitable.
IMPORTANT: Suspended ceiling: two special fixing screws
are required (not included)
IMPORTANT: Do not turn on the ceiling fan if the
blades are not in place, or the fan will not work
properly.
• Cut off the power supply before any installation or
assembly operation.
• Take the motor out of the packaging. To avoid damaging
the housing surfaces, mount the motor on a soft surface.
• In order to avoid electric shock, make sure that the power
supply has been previously disconnected.
• The electrical installation must be done in accordance
with national regulations.
• It is recommended that the installation be done by a
professional.
• Install the fan at a minimum distance of 2,50 meters from
the ground or other objects.
• The light of the fan can be connected in two ways. One
way is to control de fan and the light through the remote
control (See Step 18), and the other is to control the light
through the wall switch, made by an installer.
USE
• Turn the appliance on, by using the wall switch.
• The LED lamp will light up.
• Turn the fan on, by using the fan on/off button (2).
• Select the desired speed (1).
• Note: You can turn off the light while the fan is working. To
do this, press the light on/off button (5)
TIMER FUNCTION
• The appliance's operating time can be controlled.
• To program an operating time simply select it by pressing
one of the timer buttons (4).
ROTATION DIRECTION CHANGE
• The device has a button (3) that allows you to change the
direction of rotation of the blades to alternate between
summer and winter modes.
Publicidad
