Turning On Power; Wireless Receiver Functions - Mitsubishi Electric ecodan PAR-WT50R-E Manual De Instalación Y Configuración

7.2. Turning on Power

When the wireless receiver is powered by in-
door unit after installation, green
and orange LED blink for 3 seconds.

7.3. Wireless Receiver Functions

(1) Normal mode
When the wireless receiver is paired with a
wireless remote controller, green
comes on. When the wireless receiver is com-
municating with a wireless remote controller,
green LED blinks.
(2) Pairing mode
For details, refer to "5. Pairing process" in this manual.
(3) Resetting pairing information
Once pairing information has been cleared, ALL the wireless remote controllers need go
through a pairing process again.
Hold down button for 5 seconds or more
until and
mode is active. All the pairing information is
cleared.
17
LED light while pairing
Power ON
LED
Not paired
LED
Paired
Transmitting