Krups EVIDENCE CLASSIC EA89 Serie Guia De Inicio Rapido página 22

GRINDER: ADJUST THE GRINDING FINENESS
WHY ADJUST THE GRINDING FINENESS?
You can adjust the strength of your coffee by adjusting the grinding fineness of the coffee beans.
Varying the grinding fineness makes it possible to adapt to different types of bean:
• A highly roasted and oily bean will require a coarse grinding,
• A more lightly roasted bean will be drier and will require a fine grinding.
In addition, for the same coffee, the setting of your grind impacts the aroma in the cup: the finer the grind, the more
powerful the aroma.
Very Intense
intense (French)
(Dark
French)
HOW TO ADJUST THE GRINDING FINENESS
Turn the setting button located in the coffee bean container to suit your bean type and the power of aroma desired.
This adjustment must be performed during grinding and notch by notch. After 3 preparations you will notice a distinct
difference in taste.
38
Roasting:
Strong Medium Light
(Light (Amber) (Blonde)
French)
PREPARING DRINKS
DRINKS AVAILABLE FROM THIS MACHINE AND POSSIBLE SETTINGS:
Drinks
Ristretto
Short espresso with body
Espresso
Full-bodied espresso with pronounced aromas, covered
with a slightly bitter caramel-coloured crema
Long coffee
Higher in caffeine but lighter on the palate. Very popular
in the morning.
Doppio
Double espresso with an amber crema.
Americano
Double long espresso combined with hot water
Cappuccino
A balance between milk, foam and coffee
Latte Macchiato
A large helping of milk, a gourmet Espresso with milk foam
Frothy milk
A large helping of milk with milk froth
Green tea
Hot water at the ideal green tea temperature
Black tea
Hot water at the ideal black tea temperature
Infusion
Hot water at the ideal temperature for an infusion
HOW TO ADJUST THE HEIGHT OF THE COFFEE NOZZLES
For all of the drinks proposed you can lower and reassemble the coffee nozzles according to the size of your cup(s).
HOW TO START PREPARING MY DRINK
• Check that the bean container is full.
Caution: To avoid damaging your machine, take care not to pour water into the grinder.
• Check that the water tank is full. If there is not enough water, the machine will issue a warning. See chapter 7.A
"FILLING THE WATER TANK" of the quick start guide.
• Place the cup(s) under the coffee outlets.
• Select the chosen drink.
• Change the settings.
For more information see chapter 2 "DRINKS SETTINGS" of the quick start guide.
HOW TO STOP A DRINK MID-PREPARATION
You can stop the preparation at any time by pressing the Back button.
Note : that pressing this button causes the machine to reset, which can take up to 30 seconds. This phase is
normal. When a cycle is interrupted, stopping is not immediate. The machine will finish its cycle and the preparation
will be cancelled.
Approximate
Extra shot
X2 Dark
volume
x
25 ml
x x x
40 ml
x x x
120 ml
x
100 ml
x
240 ml
x x x
180 ml
x x x
240 ml
160 ml
x
200 ml
x
200 ml
x
200 ml
.
39