Krups EVIDENCE CLASSIC EA89 Serie Guia De Inicio Rapido página 24

MAINTENANCE OF THE WATER TANK AND BEAN CONTAINER
WHEN AND HOW TO CLEAN THE WATER TANK ?
To preserve a better coffee flavour, influenced by water quality and for hygiene reasons, we advise you to clean the
water tank daily with hot tap water and a bottle brush. We also recommend that you air dry this part before replacing it.
WHEN AND HOW TO CLEAN THE BEAN CONTAINER ?
Coffee beans may leave oily residues on the coffee tray which may affect the quality of the coffee. To preserve the
aromas of your coffee and for hygiene reasons, we recommend that you wipe it with a soft, dry cloth whenever it needs
to be filled.
Caution: Do not clean using water as water in the bean container damages the machine.
MAINTAINING THE MILK SYSTEM
Maintenance When?
Milk rinsing After each milk drink, when Allows you to rinse the machine's milk circuit. You
prompted by the machine. can start a milk system rinse at any time in the
(10 s - 20 ml)
"maintenance" menu
Manual rinsing of the After each milky drink. For hygiene reasons, cleaning is required after each
milk tube (30 s) milky drink made. This involves carefully and manually
cleaning the tube and its connector with hot water
after each use.
See Chapter 5.B "QUICK RINSE AFTER A
MILKY DRINK" of the quick start guide
Cleaning the milk For hygiene reasons, we This involves dismantling and cleaning the removable
recommend that you clean
system "One Touch Cappuccino" block regularly. See chapter
the whole milk system
6 "DEEP MANUAL CLEANING OF THE MILK SYSTEM
manually every day for
- 5 MIN" of the quick start guide.
regular use or when it has not
been used for a while (more
than 2 days).
!
Important: For reasons of hygiene and in order to obtain identical froth each time, we recommend that you
replace the milk hose and its plastic nozzle approximately every three months. These accessories are available from
the KRUPS.fr website.
42
Accessories
Explanation
required:
Hot water + soap
Hot water + soap +
cleaning needle
OTHER MAINTENANCE TASKS
Maintenance When?
Coffee flushing We recommend that you Allows you to rinse the machine's coffee
45 s - 30 ml rinse the coffee system every circuit. This process only uses hot water. It
day or when it has not been ensures the authentic taste of your coffee.
used for a while (more than
2 days).
Machine When requested by the To preserve the best coffee flavour and for
Cleaning machine. hygiene reasons, we advise you to clean
13 min - 600 ml and degrease the machine. It guarantees
you optimal preservation of the aromas of
your drinks.
Descaling The appliance notifies you Descaling your machine ensures its proper
20 m - 600 ml when it is necessary to run a functioning and eliminates any deposit of
descaling program limescale or tartar.
This step is very important to ensure the
proper operation and durability of your
appliance.
!
Important: You do not have to run the maintenance program as soon as the appliance requests it, but you must
do it reasonably soon after. If the cleaning is postponed the alert will remain displayed as long as the operation has
not been performed.
!
Important : If you unplug your machine during maintenance or in the event of electrical failure, the cleaning
program will resume from the start. It will not be possible to postpone this operation: it is mandatory to rinse the water
circuit. In this case a new cleaning tablet may be necessary.
Accessories required +
Explanation
actions required
O Place a container under the
coffee nozzles O Press
O Select "maintenance" then
"rinsing" Automatic rinsing when
switching on the device can also
be activated in "settings"
Accessory required: 1 KRUPS
cleaning tablet and a container
with at least 600 ml capacity.
See chapter 10 "FULL
AUTOMATIC CLEANING OF
THE MACHINE 3x / YEAR - 13
MIN" of the quick start guide You
can also carry out cleaning when
you wish by pressing then
"maintenance".
Accessory required: 1 KRUPS
descaling sachet and a
container with at least 600 ml
capacity.
When it is necessary to run a
descaling program, the appliance
notifies you.
O When the descaling alert is
reached and is displayed
press to start the program; to
postpone it, press .
Once the procedure has started,
follow the instructions that
appear on the screen. Descaling
can also be
started via the "Maintenance"
menu -> "Descaling".
See chapter 11 "DESCALING
PROGRAM - 20MIN 3x / YEAR"
of the quick start guide
43