Ghibli 1 Serie Uso Y Mantenimiento página 52

EN
WARNING:
Make sure that the mains electrical volt-
age is compatible with the battery charg-
er's operating voltage (230 Vac for the Eu-
ropean market; 115 Vac for the American
market; 50/60 Hz).
- Leave the batteries to charge until the
"Green" LED (7) lights up, then remove
the power cable (5) and put it away.
- Reconnect the battery plug (1) to the sys-
tem socket (2).
4.1.b - Charging the battery using an
external battery charger
(Fig. 7)
- Move the machine close to the battery
charging station.
- Remove the battery plug (1) from the sys-
tem socket (2).
- Connect the battery plug (1) to the exter-
nal battery charger socket (3).
- Once battery charging is complete, re-
connect the battery plug (1) to the system
socket (2).
1
2
3
EN-12
1
Fig. 7