Ghibli 1 Serie Uso Y Mantenimiento página 58

EN
8.1.b - Preparing the machine and
choosing the cycle
- Turn the key (7) to its "1" position. The
instrument's led indicators (8) will light up
to indicate the battery charge level and
the display (8a) will light up to indicate the
machine's working hours.
- Release the lever (9) and lower it; the
floor squeegee (4) is lowered.
- Press the pedal (10), disengage it from its
lodging and lift it: the brush/brushes (11)
will be lowered.
Working cycle:
- The machine can perform 4 working cy-
cles:
Drying only cycle:
- In order to perform the drying cycle alone,
press the switch (12). The suction unit will
activate.
Use the appropriate controls to activate
the drive mechanism, if available for the
model in use.
Brushing only cycle:
- In order to perform the brushing cycle
alone, press the switch (13) to enable the
rotation of the brushes.
Use the appropriate controls on the han-
dlebar unit (buttons or levers) to activate
the rotation of the brushes (the drive
mechanism will also be activated for
models which are equipped).
Washing, brushing cycle:
- Press the switch (13) to enable the rota-
tion of the brushes; Press the switch (14)
to enable water dispensing.
Washing, brushing, drying cycle:
- Press the switch (12) to activate the suc-
tion unit, press the switch (13) to enable
the rotation of the brushes and press the
switch (14) to enable water dispensing.
Use the appropriate controls on the han-
dlebar unit (buttons or levers) to activate
brush rotation and water dispensing (the
drive mechanism will also be activated for
models which are equipped).
7
12
12
7
11
5
10
EN-18
8a
13
13
8a 8
14
8
14
9
1
4
3
Fig. 12