Ghibli 1 Serie Uso Y Mantenimiento página 54

EN
6.1 CONTROL PANEL
(Fig. 9)
1) Suction unit activation switch
This switch can be enabled by turning
the key (2) to its "1" position.
With the switch in its "I" position, press
it down. The switch will light up and the
suction unit will activate.
2) Starter key
Turn the key to its "1" position to enable
the machine for function.
3a) Operating time indicator.
This indicator lights up while the key is
in its "1" position and indicates the ma-
chine's working hours.
3b) Battery charge status indicator.
This indicator lights up while the key is in
its "1" position and indicates the battery
charge status.
- Maximum battery charge status is indi-
cated by the illumination of the green
led indicators or the illumination of the
single led indicator located on the far
right of the instrument.
- Medium battery charge status is indi-
cated by the illumination of the orange
led indicators or the illumination of the
led indicators at the centre of the in-
strument.
- Minimum battery charge status is indi-
cated by the illumination of the red led
indicators.
N.B.:
Do not use the machine when the led
indicator(s) are lit. Bring it to the battery
charging station as soon as possible.
4) Brush rotation enabling switch
This switch can be enabled by turning the
key (2) to its "1" position.
Press the switch down to enable the rota-
tion of the brushes; the brushes are con-
trolled by means of buttons (7) or (8), or
else by means of the levers (9), based on
the model. The button lights up when the
brushes are rotating.
5) Water solenoid valve switch
This switch can be enabled by turning the
key (2) to its "1" position and the switch
(4) to its "I" position.
Press the switch (5) to enable the water
solenoid valve for opening. The solenoid
valve itself is controlled by means of but-
tons (7) or (8), or else by means of the
levers (9), based on the model. The but-
ton lights up when the solenoid valve is
open.
Use the tap (6) to adjust the quantity of
water.
6) Water quantity adjustment tap
- Turn the tap (6) counter-clockwise to
increase the quantity of water or turn it
clockwise to decrease it.
7) Brush rotation activation button
With the key (2) in its "1" position and the
switch (4) in its "I" position, press this but-
ton to activate brush rotation and water
dispensing.
8) Drive mechanism and brush rotation
activation levers
With the key (2) in its "1" position and the
switch (4) in its "I" position, these levers
(9) activate the drive mechanism, brush
rotation and water dispensing.
Press the levers in direction "A" to acti-
vate forward movement;
press the levers in direction "B" to acti-
vate reverse movement.
EN-14