PREPARATION
Switching on and off
With the »
– The operating lamp is on » «.
Note:
Your unit and the mains unit are disconnected from the alternating
voltage system only when the mains plug has been removed from
the mains socket!
Stand by
If you do not select a function within a 10 minute period, the unit
switches to "stand by". When the unit is in stand by mode, the parts
that usually touch the tape no longer come into contact with it. The
unit remains in stand by mode.
Connecting accessories
Connecting the 536 foot control, 541 hand control and headset: see
figure at the beginning of this booklett.
Steno-cassette compartment
After stop has been pressed, open the steno-cassette compart-
ment.
Insert a steno-cassette into the cassette compartment. Make sure
the closed end of the cassette is facing you and the labelling can
be read.
Close the comparment manually.
_______________________________________________
– POWER« button.
3