Grundig St 3211 Manual De Instrucciones página 22

FOOT CONTROL 536
Connection
HEADSET HEADSET FOOT CONTROL FOOT CONTROL
Operation
You can operate the foot control with both feet. You can rest the foot
that you are not using on the middle section.
Switch options: right pedal
Start:
You can use the start pedal (right pedal) to either lock or scan. Slide
the switch on the bottom of the machine to the desired position.
Lock setting:
Scan setting:
Short rewind:
The short rewind function is also carried out when the start button is
switched on.
If you want to rewind the tape past the pre-set short rewind time, press
the short rewind button several times.
After the short rewind function is finished, the unit switches to
playback start.
Plug the foot control plug into the socket.
left pedal
middle pedal = not used.
press the button – start,
release the button and press it again – stop
press the button – start,
release the button – stop
_____________________________________
= start
= short rewind
7