Blowing function
Connect the suction hose to the
blower connection, this will activate
the blower function.
12 English
Integrated filter cleaning system
ATTENTION
Only operate the filter cleaning without
a filter bag inserted, otherwise the filter
bag can get damaged.
The filter cleaning system is intended
for vacuuming up large volumes of fine
dust without an inserted filter bag.
Note: Thanks to the filter cleaning sys-
tem the soiled flat pleated filter can be
cleaned at the push of the button and
the suction performance can be in-
creased again.
Place the handle of the suction
hose in the accessory compartment
on the appliance head. Push the fil-
ter cleaning button 3 x while the ap-
pliance is switched on, wait 4 sec-
onds between the individual opera-
tions.
Note: After operating the filter cleaning
button several times, check the con-
tainer for its filling volume. Otherwise,
the dirt might escape when the con-
tainer is opened.