Fronius MHP 280i G PM Manual De Instrucciones página 45

Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
-
-
-
Do not reach into the rotating feed rollers of the wire drive or into rotating drive
components.
The cover of the welding torch may only be opened while maintenance or repair
work is being carried out.
During operation
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious personal injury and damage to property.
▶
▶
▶
Cogs
Feed rollers
Wirespools and wire electrodes
Ensure that the cover is closed.
Keep the cover closed.
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
Before starting work, switch off all the devices and components involved and
disconnect them from the grid.
Secure all the devices and components involved to prevent unintentional re-
starting.
After opening the device, use a suitable measuring instrument to check that
electrically charged components (such as capacitors) have been discharged.
English
45