Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING & CLEANING CARTRIDGE
1
6
INSTALLING CARTRIDGE FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the powerhead and place in an upside-down position.
powerhead (Fig. 2 & 3).
turning the retainer clockwise; do not over-tighten (Fig. 4 & 5).
5. Place the powerhead back onto the collection tank.
REMOVING & CLEANING CARTRIDGE FILTER
FILTER
3
2
7
4
15
5
Publicidad
