Fanvil V64 Guia De Inicio Rapido página 5

Device installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
PUSH
Wall mounting (wall stand need buy separately)
Connecting to the device
Please connect power adapter, network, PC, handset, and headset
to the corresponding ports as described in below picture.
① USB port: connect USB device (USB flash disk).
② Power port: connect the power adapter.
③ Network port: connecting local area network or Internet.
④ PC port: the network port connect to the computer.
⑤ Headset port: connect headset.
⑥ Handset port: connect IP Phone handset.
USB
①
DC 5V
②
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user
manual and FAQ for more detailed information.
40°
45°
Internet PC Headset
③ ④ ⑤
Network connect
Using Ethernet
1. The power on the device and connect the WAN port of the
phone to the RJ45 socket of a hub/switch or a router
(LAN side of the router) using the Ethernet cable.
2. The default is DHCP mode.
Using Wi-Fi
1. The power on the device and make sure the phone is idle.
2. Press Menu > Basic > WLAN, Enabled the Wi-Fi Feature.
3. Press scan to search for currently available wireless network.
4. Enter the available network and select the Wi-Fi you want to
connect.
5. Press connect soft key and enter the appropriate password to
connect to the Wi-Fi. The default is DHCP mode.
Phone configuration
Configuration via LCD menu of phone
1. Press Menu > Advanced (default password 123) .
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE).
3. Select Accounts: To configure enable the account, fill the SIP
server address, port, user name, password etc.
4. Save the configuration.
Configuration via web
1. Get the IP address from the phone: Press
Menu > Status > IPv4 / IPv6.
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both 'admin'.)
3. Configure: Select network/line etc, and fill the relevant content.
4. Save the configuration.
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
4. Headset: enter phone number and press
5. Designated line: press line key, enter phone number and
press dial key.
Accepting a call
Handset
⑥
1. Using the handset: pick up the handset.
2. Using the headset: press
3. Using the handsfree: press
Redial
1. Press
- 3 -
.
.
key, redial a call number.
down key, or
or vice versa.
or vice versa.