Publicidad
Idiomas disponibles
Idiomas disponibles
Close the fixing clip and screw the screw in until hand-
tight.
. Inserting batteries in the remote control
Two micro batteries (type AAA LR03 1.5 V) are used in the remote control.
Replace the batteries if the appliance fails to react to commands from the remote
control properly. Then follow these steps:
Remove the flap from the battery
compartment.
Remove the two batteries from the
battery compartment.
Dispose of the old batteries in ac-
cordance with legal requirements.
Insert two new micro batteries
(type AAA LR03 1.5 V) into the bat-
tery compartment. Make sure that
the battery polarity is correct.
Close the battery compartment.
. Operating the fan
WARNING!
Risk of injury!
Risk of cuts due to rotating rotor blades.
Do not put your fingers or other objects through the
safety grille.
The following chapter describes how to operate the fan using the but-
tons on the remote control. If there are differences in how to operate the
appliance, these are listed accordingly.
Plug the mains plug into the earthed socket.
Fig. Tightening the
LR03/AAA
Micro
Fig. Inserting the battery
DE
FR
NL
ES
screw
IT
EN
127
Publicidad
