Publicidad
Idiomas disponibles
Idiomas disponibles
.. Timer
While the appliance is operating, press the
to activate the timer function.
Each press of the button extends the time until the appliance switches off by 30
minutes up to a maximum of 10 hours.
The two settings 11 and 12 hours can only be selected as full hours.
The set time is shown on the display and the
.. Activate oscillation
Press the oscillation button
lating.
Press the oscillation button again to stop the oscillation.
.. Adjust inclination
Slowly and carefully push the motor block up or down to set the desired angle.
The individual positions engage audibly.
.. Adjusting the height of the base
Slightly loosen the locking screw (12) on the lower column.
Pull the lower column up as far as required.
Tighten the locking screw again.
. Cleaning the fan
WARNING!
Risk of electric shock!
There is a risk of electric shock due to live parts.
Do not immerse the appliance in water or other
liquids or hold it under running water because this
could cause an electric shock.
Unplug the mains plug from the socket before you
start cleaning the appliance.
Make sure that no liquids enter the appliance.
button (29) on the remote control
symbol lights up.
(20) on the remote control to start the fan oscil-
DE
FR
NL
ES
IT
EN
129
Publicidad
