HOMCOM 800-191V70 Manual Del Usuario página 10

4. Double pot working mode
4.1 Starting the 2 pots
4.1.1 Firstly, select one side and debug the menu, temperature and time according to
needs. Secondly, select another side and debug the wanted recipe, temperature and
time in the same way.
4.1.2 Pressing the Power Key Icon, 2 pots start working at the same time,
indicator light of Pot 1 recipe flashes once per 6 seconds at the same time,
and indicator light of Pot 2 recipe flashes once per 6 seconds at the same time, Pot 1
and Pot 2 display alternately, about 3 seconds interval;
4.1.3 It also can be started Pot 1 firstly by press "Power key" after set parameter of Pot
and then press
start Pot 2;
4.1.4 During the double pots working process, pressing the Temp or Time Key Icon once,
the recipe of temperature will be displayed alternately in left and right display screen,
3 seconds after no operation will switch to time display;
4.2 Debug during the double pots working process
4.2.1 During the cooking process of 2 pots are working at the same time, if you need to
debug the temp or time for Pot 1, press
need, the recipe can't be debug in this state. If no operation within 10 seconds after
debugging, the display screen automatically returns to normal;
4.2.2 If you need to debug the temperature or time of
4.2.3 During the cooking process, recipe and temp/time can be adjusted by press
and "Power key" in turn, then Pot 1 or Pot 2 will enter the pause mode, press "Power
key" will resume cooking after debugging;
4.2.4 After the machine enter the pause mode, if there is no operation after 5 minutes, the
suspended Pot will enter the standby mode.
4.3 Close pot or pot
4.3.1 Press the
the selected pot will stop working and return to standby mode.
4.4 Draw out of the basket
4.4.1 During cooking process, if one basket was drawn out, the display will show the
"OPEN" at any time. the corresponding side will stops working (both heating and
motor will be stopped), and it will resume working as per previous setting when the
basket is inserted back. One frying basket is removed and loaded without affecting
the work of the other pot;
4.4.2 When the frying basket is drawn out in standby state, the display will show the
"OPEN". At this time, the corresponding pot cannot be operated.
4.5 Pausing the 2 pots
4.5.1 When double-pot cooking, press "power key" once, and the 2 pots enter the pause
mode at the same time, and the two screens and recipes are flashing. Press the
"Power key" again, and the 2 pots resumes working mode;
4.5.2 When 2 pots are paused at the same time, if there are no operation within 5 minutes.
After 5 minutes, both pots will stop working and return to standby mode;
to set parameter of Pot 2, after Pot 2 ready , press "Power key" to
key or pot first, and then long press the "power key" for 2 seconds,
and then debug the temp and time as you
pot, refer to 4.2.1;
key and
key
/