HOMCOM 800-191V70 Manual Del Usuario página 11

4.5.3 During 2 pots cooking, gently press the "power key" once, the 2 pots enter the pause
mode at the same time, if you need to adjust, first press the
adjust the recipe, temperature and time according to your needs; After debugging,
press the "Power key" once to resume to work the 2 pots at the same time;
4.5.4 During 2 pots cooking, gently press "Power key" once, the 2 pots will enter the pause
mode at the same time, long press the "Power key" again for 2 seconds, 2 pots will
stop working at the same time, the left and right screens will display "OFF", and the
product will return to the standby mode after a prompt sound of "beep".
4.6 Stop the 2 pots
4.6.1 During 2 pots cooking, long press the "Power key" for 2 seconds, 2 pots will stop
working at the same time, and the left and right screens will display "OFF". After a
prompt sound of "beep", the machine will enter the standby mode.
4.6.2 There is no operation in the simultaneous cooking of 2 pots, after the display time
ends, both heating and motor will be stopped, and the display screen displays "OFF".
After the buzzer gives out 5 prompt sounds of "beep", the display screen is off and
the machine returns to the standby mode;
4.6.3 If you want to turn off one pot of the 2 pots cooking, press
long press the "Power key" for 2 seconds. The selected pot will stop working, and the
corresponding display screen will display "OFF". After a prompt sound of "Beep", it
will return to standby mode. At this point, the machine state changes to single pot
working mode.
4.7 Simultaneous end function
4.7.1 This function will be waked up only when two recipes with different time are selected
in 2 pots mode and the indicator light will be lit at the same time. The awakened state
is flashing display.
4.7.2 After selecting the menu, press "Synchronous end key" firstly, it become a normally
on, press the "Power key" again, the machine began to work, at this point, the long
time menu pot to work, short time pot of the screen shows "HOLD", when the extra
time has passed, the short time pot began to work, "synchronization end key " keep
normally on in this process;
4.7.3 During the working, if the time displayed on one pot of the HOLD is set to greater
than that on the other side, exit the synchronization end mode, and the
"synchronization end button" indicator is off.
4.7.4 During the working, pull out a pot, the time will be suspended, the other pot of the
time will also be suspended, the screen shows "HOLD", insert a pot, continue to
synchronize work;
4.7.5 During the synchronous operation, if one pot is suspended and the other pot
continues to work, exit the synchronization end function and the "Synchronization
end key" indicator is off;
Remark items
1. Boot mode: When in this mode, only the Power Key Icon is illuminated;
2. Standby mode: the Power Key Icon and Pot
illuminated;
3. Debug the unit when unit is not working: the corresponding function key is always on,
the selected recipe indicator is flashing, the rest of the menu indicator is always on, the
corresponding display is flashing alternately to show the temperature/time of the
selected recipe. When adjusting the menu, the selected recipe is flashing, when
debugging the temperature, press the temperature key, the display is flashing to show
or
or
and Pot Key Icon are all
, and then
first, and then