HOMCOM 800-191V70 Manual Del Usuario página 8

Key 5 & Key6
Controls time and temperature for the left pot. You can increase or decrease the
temperature by 5℃ ( between 80-200℃). Holding the key down will rapidly change the
temperature. Also use these keys to increase or decrease the cooking time by one minute
(between 1-60 minutes). Holding the key down will change the time rapidly.
Key 7 & Key 8
Controls time and temperature for the right pot. You can increase or decrease the
temperature by 5℃ ( between 80-200℃). Holding the key down will rapidly change the
temperature. Also use these keys to increase or decrease the cooking time by one minute
(between 1-60 minutes). Holding the key down will change the time rapidly.
Key 9 –Preheat Key Icon
Touch the " "key, press it, then select "
device; Preheat default settings: Temperature: 160℃.Timer: 3 minutes.
Key 10 –Synchronization end key
Touch the " "key, two recipe with different time can be ended at the same time.
Key 11 –The temperature of key.
Key 12 –The time of key.
Indicator light "13 " Nixie tube for the left pot body
Indicator light "14 " Temperature light for the left pot body
Indicator light "15 " Timer light for the left pot body
Indicator light "16 " Temperature unit indicator light for the left pot body
Indicator light "17 "Time unit indicator light for the left pot body
Indicator light "18 " Nixie tube for the right pot body
Indicator light "19 " Temperature light for the right pot body
Indicator light "20 " Timer light for the right pot body
Indicator light "21 " Temperature unit indicator light for the left pot body
Indicator light "22 "Time unit indicator light for the left pot body
Indicator light " 23-30 " Recipe indicator
Detailed Operation Instructions
1. Boot mode
Firstly, to confirm that the frying pan is correctly installed into the machine, insert the plug
into the socket, the machine will be powered on, the machine will beep once, all the lights
are lit for one second and then extinguished, the Power Icon will be illuminated.
2. Standby Mode
Touch the Power Icon, and the Pot 1 Selection Icon
lights up and stays on, the product enters standby mode. When the unit is in this Standby
mode and has not been operated within 5 mins, unit will be goes to Boot mode.
–Temperature and timer control keys for the left pot key
–Temperature and timer control keys for the right pot key
" or " " , and press "
and Pot 2 Select Icon
" again to start the
indicator