Silvercrest SBL 3 D2 Manual De Instrucciones página 71

9. Getting started
9.1 Switching the speaker on and off
Press and hold the
speaker. A tone sequence is output. The speaker starts in the last used
mode.
Press and hold the
speaker. A tone sequence is output and "OFF" is shown on the
display (2).
9.2 Adjusting the volume
You can adjust the volume by briefly pressing the I◂◂ (8) or ▸▸I (4)
button. The currently set volume is shown on the display (2). An
button (1) for 2 seconds to switch on the
button (1) for 2 seconds to switch off the
The display (2) switches off after approx. 2 minutes
if no button is pressed.
SilverCrest SBL 3 D2
English - 69