geberit HS01 Manual De Operación página 36

EN
Symbol
Standby mode
The control panel of the Geberit HS01 hygiene flush unit switches
to standby mode after approx. 2 minutes of inactivity and all LEDs
will switch off.
1. Press any button to exit standby mode. The current settings
will be displayed.
2. Press the corresponding button to select the desired function.
Setting the flush volume
The flush volume depends on the pipe length being flushed and the
DN pipe dimension. The following table is used to calculate the
flush volume.
A flush volume of 3 l is set at the factory. The accuracy of the flush
volume setting is +/- 10 % at 3 bar.
Table 1:
Pipe length [m]
5
10
36
Type
LED
Calculating the flush volume
DN12
1
2
Function
Battery capacity. → See "Rectifying
malfunctions", page 42.
Flush volume [l]
DN15
1
2
DN20
45036003973654923 © 09-2022
970.123.00.0(02)
2 / 2
2
3