AENO EK2 Guia De Inicio Rapido página 7

Table vinegar
leave for 1 hour without
boiling. Pour out the
contents, wash the kettle
by pouring and draining
the water 5–6 times
Troubleshooting
 The kettle won't turn on. Possible causes: socket malfunction; the kettle is
not placed on the power base. Solution: check the socket by plugging in
another device; place the kettle on a power base.
 The kettle switches off a few seconds after it is switched on. Possible
cause: no water or little water. Solution: unplug the kettle from the mains.
Wait until it has cooled down and repeat the instructions under "Using the
Device".
 The kettle will not turn off automatically after the water boils. Possible
cause: the device's lid is not closed. Solution: remove the plug from the
electric socket. Let the device cool down for a few minutes, then make sure
the lid is tightly closed.
ATTENTION! If none of the suggested methods have solved the problem,
contact your supplier or an authorized service center. Do not disassemble the
device or attempt to repair it yourself.
ASBISC reserves the right to modify the device and to make revisions and changes to this
document without prior notice to users.
The warranty period and service life is 2 years from the date of purchase of the product.
Manufacturer's information: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol,
Cyprus. Made in China. For date of manufacture see package.
Up-to-date information and a detailed description of the device, as well as connection instructions,
certificates, information about companies that accept quality claims and warranties, are available
for download at aeno.com/documents. All trademarks and trade names mentioned are the
property of their respective owners.
aeno.com/documents
Citric acid
leave for 15 minutes. Pour
out the contents, wash
the kettle by pouring and
draining the water
5–6 times
Anti-scale product
instructions on
the product
package
7