Publicidad
Idiomas disponibles
Idiomas disponibles
Taking out of operation
30
Advice on stackers with cooling slots
These models are provided for dispensing cooled plates and lids e.g. in Cook
& Chill kitchens. For this purpose the appliances loaded with plates must re-
main for several hours in cold stores. The duration of cooling depends upon
the initial temperature of the plates, the temperature of the cold store and the
desired crockery temperature. The stackers must always be free-standing in
the room so that optimum air circulation is ensured by free convection in and
around the appliances.
Use of the cover
The cover ensures effective protection against dust and condensed water
even during relatively long periods of temporary storage.
In heated appliances, using the cover reduces the heat loss upwards and re-
duces the heating time of the inserted crockery or delays the cooling of crock-
ery which has already been warmed.
Even a gap between the cover and the top plate of the appliance can lead to
marked energy losses caused by heat loss, a reduction in the maximum crock-
ery temperature and thus to a longer heating time.
Transport
Observe the safety instructions from page 22 onwards.
Set all regulators to G .
•
•
Switch off the appliance at the ON/OFF switch.
•
Pull out the mains plug and insert it into the holder provided.
•
Release both locking brakes.
•
Grip the appliance by the sliding handles and move it to the destination.
•
At the destination, lock both locking brakes in order to secure the appliance
against inadvertent movement.
•
Insert appliance plug into suitable socket with earth contact
•
Switch on the appliance with the ON/OFF switch.
•
Set the desired power using the regulator.
Switch off the appliance
Set all regulators to G .
•
•
Switch off the appliance with the ON/OFF switch.
•
Pull out the mains plug and insert it into the holder provided.
•
Clean the appliance.
The internal surfaces of the stacker and the base plates can become hot dur-
ing operation and only cool down slowly in the air. For cleaning, allow the ap-
pliance to cool down with the covers removed or wear suitable gloves.
Platform stacker
43.3000.6
Publicidad
