Descargar Imprimir esta página

Haier HWO45CO4P7B Manual De Instrucciones página 11

Horno encastrable con autolimpieza pirolítica

Publicidad

Idiomas disponibles

Idiomas disponibles

Please observe the installation instructions provided
and note that this appliance should only be installed by a
qualified technician.
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
In case a new socket is needed, installation and cable
connection must only be done by a qualified electrician.
If the plug or power connection is no longer accessible
following installation, a disconnecting device must be
present on the installation site with a contact gap of at
least 3 mm.
Adapters, multi-way strips and extension cords must
not be used. Overloading can result in fire.
If the appliance is not fitted with a supply cord and a
plug, the connection equipment must have a contact
separation in all poles that provide full disconnection,
and the appliance must be incorporated in the fixed
wiring in accordance with the wiring rules.
Fitted units
This appliance is only intended to be fully fitted in a
kitchen.
This appliance is not designed to be used as a tabletop
appliance or inside a cupboard.
The fitted cabinet must not have a back behind the
appliance.
A gap of at least 45 mm must be maintained between
the wall and the base back panel of the unit above.
EN 12

Publicidad

loading