Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38

Operating procedure

The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON as soon as you
begin cooking.
❑ Switch the ventilator OFF a few minutes
after you have finished cooking.
Switch ON/OFF Pilot-lights: press
to switch on/off lights.
Switch OFF suction / ON speed
(rating) of suction speed 1: press this
switch once turn off the speed (rating) of
suction function that has been selected or (if
no speed rating of suction function select the
speed (rating) of suction speed 1, press
again and keep pressed to activate the time-
function for 20 minutes (blinking light),
following this the cooker hood will switch off.
2
Speed selecting button suction
speed 2: press this switch once to select the
speed rating of suction speed, press again
and keep pressed to activate the time-
function for 15 minutes (blinking light)
following this the cooker-hood will switch off.
3
Speed selecting button suction
speed 3: press this switch once to select the
speed rating of suction speed, press again
and keep pressed to activate the time-
function for 10 minutes (blinking light)
following this the cooker-hood will switch off..
Speed selecting button (speed
rating) for intensive suction (with timer):
press to select the suction-speed (rating) ,
the functioning-time is 5 minutes (blinking
push-button) , following this the suction
function will either turn off or return to the
suction-speed that had previously been
selected.
12
Note: It is possible to
keep a check of this function so that the
hood switches off 5 minutes after it has
worked, (even though another function had
been selected prior to this one) after having
pressed the button, press again and keep
pressed , the pilot-light will start blinking
indicating that the selected function has
been set.
Reset Button for saturation of
filters: the hood will warn the user that it is
time to do maintenance work on the filters,
by giving out a light-signal.
Red-light Button blinking: carry out the
maintenance of the greasy filters, following
this press the button for over 3 seconds and
the button will turn off.
Red-light Button: carry out maintenance on
carbon-filters, following this press the button
for more than 3 seconds, the button will
switch off.
Attention: the hood is provided only with a
warning signal for greasy filters.
To put into function the greasy-filter signal:
Set the cooker-hood off, press switch button
for more than 3 seconds ( the switch will
turn on red signalling that the function has
been set.
To disactivate the carbon filter signal, repeat
the entire procedure again.

Publicidad

Tabla de contenido
loading

Tabla de contenido