Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONS
Testing
1.
Clean the freezer with lukewarm water and detergent, and wipe dry.
Note: Electrical components should be cleaned with a dry cloth.
2.
Turn the thermostat knob to the "2" position, and plug the freezer into the
wall outlet.The compressor will begin to run.
3.
Check, after 30 minutes of operation, to ensure that the freezer is cold.
Temperature Control
1.
The temperature control (thermostat knob turned by coin) is located near the
top of the unit.
2.
Turning the thermostat knob adjusts the temperature of the freezer.
3.
The marks on the knob represent different settings. Setting "1" is the warmest
and setting "4" is the coolest.
4.
The factory recommended setting is "2" for normal operating conditions.
Do not turn on the Freezer for 4 hours. After the Freezer is in place it needs to
be left for 4 hours. This allows time for the coolant to settle.
EN
31
Publicidad
