is set and the time that has passed until
DEACTIVATE THE AUTOMATIC
COOK START FUNCTION
2
Power Function
This function allows the hot plates to
Activating
Related hot plate must be selected.
2
until P symbol shown on selected
one second.
Deactivating
. Related hot plate must be selected.
2
Timer function
process easier because you do not
after the set time has lapsed. There
is a separate timer for each hot plate,
which allows all of the hot plates to
be timed simultaneously.
The function is controlled using
the increase/decrease time touch
buttons
and
1 C o n n e c t t h e a p p l i a n c e a n d
2 Use the touch buttons
1 and 99 minutes.
The timer will be set for the hot plate.
Once the countdown is complete, the
will hear a series of beeps, which
you can stop by pressing any of the
touch buttons.
Setting the timer for more than
Changing the programmed time.
You can change the time afterwards.
1 Use the touch buttons
1 and 99 minutes.
Now you can read and change the
early, use the touch button
6 to set it to 00 or press both buttons
at the same time.
touch buttons
children from playing with the controls.
down for around 1 second. When the
Tips for using ceramic
* Pans with a smaller diameter than
the shown heated area are not
recommended.
glass because they could scratch
it.
from large pots and pans without
them clean and in good condition.
products containing sugar on the
maintenance
condition, clean it using suitable
products and tools once it has cooled
/
use harsh cleaning products or tools
that could scratch the surface, or
7 or
be cleaned using a damp cloth and a
gentle detergent or warm soapy water.
use a special cleaner for ceramic hot
plates and follow the instructions on
to being burned repeatedly can be
Slight tinges of colour are caused by
pots and pans with dry grease residue
underneath or due to grease between
cleaner for ceramic hot plates. Plastic
i m m e d i a t e l y u s i n g a s c r a p e r.
Metallic sheens are caused by
by cleaning thoroughly using a
special cleaner for ceramic hot plats
you may need to repeat the process
A pot or pan may become
EN
19