• You can also adjust the timer with the increase/decrease
time selector buttons (8).
Note: Default time is 15 min but you can set the timer from
1 min to 60 min.
Note: You can also set a time and temperature without
choosing any program using the time and temperature
selector buttons.
Note: If you hold on pressing the increase/decrease
buttons the time will change rapidly.
• Once set up, press the pause/start button (9) and the
fryer will start cooking.
• During the cooking process, the pause/start button and
the button for the selected programme will flash showing
when the appliance is heating.
Note: Have in mind that if the appliance is cool, you should
add 3 minutes to the cooking time or use the pre-heating
program (1).
Note: If you want to shake the ingredients, pull the fry pot
out of the appliance by the handle and shake it. When
you introduce the pot in the fryer again the program will
continue.
Note: If you want to stop the cooking process, press the
pause/start button (9).
• Once the cooking time reaches its end, the appliance will
beep ten times. You can now pull out the fry pot.
Note: The fan will continue working for 1 min cooling down
the appliance.
CAUTION: Fry pot and food will be very HOT.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
Note: Remove the pot to let the air fryer cool down more
quickly.
• Clean the appliance as it is explained in the «Cleaning»
section.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• It is advisable to clean the appliance regularly and
remove any food that remains.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• The following pieces may be washed in a dishwasher
(using a soft cleaning program) or soapy hot water:
- Tray
• Then dry all parts before its assembly and storage.