Publicidad
ENGLISH
8
9
10
11
12
Induction hob's diameter
When the induction hob is switched on, it will beep, and all indicators will light up for
1 second indicating that the hob has entered standby mode.
1. Press the on/off icon, all the indicators will show '-'. If power is not selected within 1
minute, the hob will turn off automatically.
2. Place a suitable cookware on the cooking zone you wish to use. Make sure the
bottom of the cookware and the cooking-zone surface are clean and dry.
3. When you press the icon of the desired cooking zone, the indicator next to the icon
will flash (lower zone).
4. Select a power level by sliding your finger on the slider. If power is not selected
within 1 minute, the hob will turn off automatically. If so, go back to step 1 and try
again. You can change the power setting at any time during cooking.
Once cooking is complete:
1. Press the icon of the cooking zone you wish to switch off (lower zone).
2. Turn off the cooking zone by sliding the slider to the left. Make sure the display
shows "0".
3. Switch the induction hob off by pressing the on/off icon.
4. Be careful, the surface may be hot. The "H" symbol indicates that the corresponding
cooking zone is still hot. The H symbol will disappear once the surface has cooled down
and reached a safe temperature. It can also be used as an energy-saving function: if
42
EVVO PLACA DE INDUCCIÓN V61
Bottom left cooking zone
Right cooking zone.
Keep Warm function.
Display: it displays the power level, error codes and
status of the induction hob.
Timer display.
Publicidad
