Publicidad
ENGLISH
- The timer can be set for up to 99 minutes.
1. Make sure that the hob is switched on and that the cooking zone icon is not
selected (the zone indicator does not flash).
Note: you can set the timer before or after the end of the cooking zone power
setting.
2. Press the timer icon. "10" will appear on the timer display and "0" will flash.
3. Adjust the time using the slider.
4. Press the timer icon again, this time the "1" will flash.
5. Adjust the time using the slider.
6. Once time is confirmed, the countdown will start automatically. The display will
show the remaining time at each hour.
7. When the countdown is finished, it will beep for 30 seconds, and the timer display
will show "- -".
Use of the timer to turn off one or more cooking zones:
1. Press the icon of the cooking zone in which you want to set the timer (lower zone).
2. Press the Timer icon. "00" will appear on the timer display and "0" will flash.
3. Adjust the time using the slider.
4. Press the Timer icon again, this time the "0" will flash.
5. Adjust the time using the slider.
6. Once time is confirmed, the countdown will start automatically. The display will
show the remaining time at each hour.
NOTE: there will be a red dot in the lower right corner of the power level indicating
that the zone is selected.
7. When the countdown ends, the corresponding cooking zone will turn off
automatically.
NOTE: the other cooking zones will continue running if previously switched on.
Setting the timer in more than one zone:
1. When you set the timer for several cooking zones, this is indicated by red dots on the
corresponding cooking zones. The timer display will show the remaining time. The
corresponding cooking zone point will flash.
2. When the countdown is over, the corresponding cooking zones will be switched off.
The display will show the new timer and the corresponding zone dot will flash.
NOTE: press the icon of a cooking zone to make the timer display show the remaining
44
EVVO PLACA DE INDUCCIÓN V61
Publicidad
