Samsung HW-Q990D Guia Del Usuario página 21

07 CONNECTING A MOBILE DEVICE
Method 1. Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on.
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 1 m distance.
1. Press the PAIR button on the Soundbar remote control to enter the "BT PAIRING" mode.
(OR) a. Press the
(Multi Function) button on the top panel and then select "BT".
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if there is a connect record.
b. When "BT READY" appears, press and hold the
display "BT PAIRING".
2. On your device, select "Soundbar Q-Series" from the list that appears.
• When the Soundbar is connected to the Mobile device, [Mobile Device Name] → "BT" appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY" mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., "Soundbar Q-Series") in the list of speakers on the Mobile device, delete it.
• Repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the
than 5 seconds while the Soundbar is in "BT" mode.)
Mobile device
Top of the Soundbar
BT READY
(Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
Top of the Soundbar
BT PAIRING
ENG - 21
5 Sec
(Mic On/Off) button on the top of the Soundbar for more