Samsung HW-Q990D Guia Del Usuario página 6

Up/Down/Left/Right
Info
WOOFER LEVEL
VOLUME
TONE CONTROL
Setting the (Sound Control)
• Active Voice Amplifier (AVA) : Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly.
No data is saved during the analysis.
• Voice enhance mode enhances spoken dialog in movies and TV to make it easier to hear.
• Night mode is optimized for night time viewing with the settings adjusted to bring the volume down but keep the dialog clear.
• Sound Grouping : The Soundbar main unit and the Surround Speakers play the entire sound instead of surround sound, making it ideal for
large groups of people listening to music in a large space.
‒ This menu is initially activated when the Surround Speakers are connected, and then the menu remains activated regardless of the
connection of the Surround Speakers.
‒ If you enable the Sound Grouping, there are no differences in sounds between the Sound modes.
‒ Sound does not come out from all speaker units of the Soundbar main unit and the Surround speakers, but only from certain
predetermined units, which vary by model.
• Private Rear Sound : This mode sets the sound to come out from the Surround Speakers only, allowing you to listen without being disturbed
by others.
‒ If you enable this mode, sound does not come out from the Soundbar main unit and the Subwoofer. Sound only comes out from the front
channel of the Surround Speakers.
‒ If you enable the Private Rear Sound, there are no differences in sounds between the Sound modes.
‒ The function turns off when the power turns off or the Surround Speakers connection is lost.
‒ The menu is activated only when the Surround Speakers are connected.
‒ This mode is automatically turned off and becomes unavailable when the Q-symphony function turns on.
• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/
Down buttons.
(Make sure the Sound mode is set to "Standard".)
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
• ID SET
Use this option when the Subwoofer or Surround Speakers are not connected or need reconnection.
While powered off, press and hold the Up button for 5 seconds to perform ID SET. (See page 11.)
Press to display information about the active function or the codec available.
In BT mode, it displays the connected device (when pairing is complete) or "BT ready" (when pairing is required).
Push the button up or down to adjust the level of the woofer (bass).
Push the button up or down to adjust the volume.
• Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted
using the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode.
• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the
volume between -6~+6 by using the Up/Down buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.
ENG - 6