Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
1. Slide switch
Accidental re-startpreventive function
Even if the battery cartridge is installed on the tool with the slide switch in the "I (ON)" position, the tool does notstart.
To start the tool, first slide the slide switch toward the "O (OFF)" position and then slide it toward the "I (ON)" position.
Electronic torque controlfunction
The tool electronically detects situations where the wheel or accessory may be at risk to be bound. In the situation, the tool is
automatically shut off to prevent further rotation of the spindle (it does not prevent kickback).
To restart the tool, switch off the tool first, remove the cause of sudden drop in the rotation speed, and then turn the toolon.
Soft startfeature
Soft start feature reduces starting reaction.
ASSEMBLY
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function
on the tool.
Installing side grip(handle)
CAUTION: Always be sure that the side grip is installed securely before operation. Make sure that the side grip is installed
correctly and tightened securely .If not it may damage the tool and cause serious personal injury.
Make sure the screw thread on the side grip aligns with the hole on the tool, hold the tool firmly with one hand, then turn the
side grip as far as it can go. Clockwise to install and anticlockwise to remove.
And the side grip can be attach on the left ,on the top or on the right.
KEEP WORKiNG
18
Publicidad
