Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
3. Turn clockwise to screw the lock nut onto the spindle as far as it can go. Make sure that the protrusions part of the lock nut
upwards.
5
4. Then tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and
securely tightenclockwise.
6
7
1. Inner flange 2. Spindle 3. wheel guard for cutting 4. Abrasive cut-off wheel 5. Lock nut 6. Lock nut wrench 7. Shaft lock
To remove the wheel, follow the installation procedure inreverse.
OPERATION
WARNING: It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and
excessive pressure could cause dangerous wheel breakage.
WARNING: ALWAYS replace wheel if tool is dropped while grinding.
WARNING: NEVER bang or hit grinding disc or wheel ontowork.
KEEP WORKiNG
24
Publicidad
