Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
WARNING: Avoid bouncing and snagging the wheel, especially when working corners, sharp edges etc. This can cause loss of
control and kickback.
WARNING: NEVER use tool with wood cutting blades and other saw blades. Such blades when used on a grinder frequently kick
and cause loss of control leading to personal injury.
CAUTION: Never switch on the tool when it is in contact with the workpiece, it may cause an injury tooperator.
CAUTION: Always wear safety goggles or a face shield duringoperation.
CAUTION: After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting
the tool down.
CAUTION: ALWAYS hold the tool firmly with one hand on housing and the other on the side grip(handle).
Grinding and sanding operation.
Turn the tool on and then apply the wheel or disc to the workpiece.
In general, keep the edge of the wheel or disc at an angle of about 15° to the workpiece surface.
During the break-in period with a new wheel, do not work the grinder in forward direction or it may cut into the workpiece. Once
the edge of the wheel has been rounded off by use, the wheel may be worked in both forward and backwarddirection.
KEEP WORKiNG
25
Publicidad
