Publicidad
Idiomas disponibles
Idiomas disponibles
X B E a
2 0
Keep Working
1. Inhalation vent
Remove the dust cover from inhalation vent and clean it for smooth air circulation.
1
1. Dust cover
NOTE: Clean out the dust cover when it is clogged with dust or foreign matters. Continuing operation with a clogged dust cover
may damage the tool.
APPROVED ACCESSORIES
CAUTION: These accessories below or attachments are recommended for use with your Elite tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its
stated purpose. The permissible speed [min-1] or the circumferential speed [m/s] of the wheel used must at least match
the values given in the table.It is therefore important to observe the permissible rotational/circumferential speed on the label of
the abrasive tool.
If you need any assistance for more details regarding these accessories, ask your local Elite Service Center.
Elite genuine battery andcharger
Lock nut wrench
Max.[mm] Max.[mm]
[mm]
D
b
d
min
m/s
[
]
[
]
- 1
125
6.4
22.2
10.000
80
KEEP WORKiNG
28
Publicidad
