Pioneer Club5 Manual De Instrucciones página 56

Contents
Stereo Pair
It is possible to play the music from a BLUETOOTH wireless technology enabled device through two of these units at the same time. Pair the BLUETOOTH wireless
technology enabled device with the unit that will become the main unit. (
Basic Operations
1"
Main
(LIGHTING)
Main & Sub
≫ ≫
Preparations
p10)
(TWICE BLINKING)
Sub
17
≫
Playback Voice Functions
Perform the following procedure when this unit is
on.
1"
1. Repeatedly press the INPUT buttons on the
first unit (main unit) and the second unit (sub
unit) until the " " LEDs start to blink slowly, and
change the input source to "BLUETOOTH".
2. Press and hold the STEREO PAIR button on the
main unit for 1 second. The INPUT button blinks
twice.
3. Press and hold the STEREO PAIR button on the
sub unit for 1 second. Pairing is complete when
the INPUT buttons on the main unit and the sub
unit change to being lit.
4. Play the BLUETOOTH wireless technology
enabled device after connecting it to the main
unit via BLUETOOTH.
• You cannot pair with the sub unit during play.
• Use stereo pair connection with two units with
the same model number. Connecting units with
different model numbers will mean the balance of
the volume, etc., will not be right.
• When you change the volume on one unit during
Top Panel≫ Front Panel≫ Rear Panel≫
≫
Setup
Main (Stereo) Sub (Stereo)
≫