TFA Dostmann TRINITY 30.3058 Instrucciones De Uso página 13

TFA_No. 30.3058_Anleit_02_22 16.02.2022
TRINITY – Wireless thermo-hygrometer
Therefore, please note the following steps:
• The recommended distance to any interfering sources like computer screens or TV sets is at least
1.5 - 2 meters.
• Within concrete walls (reinforced with steel) such as basements, the received signal is naturally
weakened. In extreme cases, please place the unit close to a window to improve reception.
• During night-time, the atmospheric interference is usually less severe and reception is possible in
most cases. A single daily reception is adequate to keep the accuracy deviation under 1 second.
7. Operation
• Important: a button operation is not possible during the reception of the transmitter or of the radio-
controlled time signal.
• Press and hold the MAXMIN/+ or RCC/- button in the respective setting mode for fast setting.
• The device will automatically quit the setting mode if no button is pressed for 20 seconds.
7.1 Manual settings
• Press and hold the SET button in normal mode.
• RCC appears on the display and on (default) will be flashing.
• Press the MAXMIN/+ or RCC/- button to deactivate (OFF) or activate (on) the DCF time reception.
• Once the DCF time reception is deactivated, the clock must be manually set.
• Press the SET button to do the settings in the following sequence: Time zone (0 - default), the 12 or
24-hour system (24hr - default), the hours, the minutes, the year, the month, the day, the language
of the day of the week (GERMAN - default), and the temperature display (°C - default). Press the
MAXMIN/+ or RCC/- button to adjust it.
• Confirm with the SET button.
24
16:23 Uhr Seite 13
TRINITY – Wireless thermo-hygrometer
• Once the DCF time signal is successfully received, the manually set time is overwritten, if the DCF
reception is activated.
7.1.1 Time zone setting
• In the setting mode you can make the time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF signal can be received but the time
zone is different from the DCF time (e.g. +1=one hour plus).
7.1.2 12/24-hour display setting
• Press the MAXMIN/+ or RCC/- button in the setting mode to choose between the 12 or 24-hour system.
• In the 12-hour system AM or PM (after 12 o'clock) appears on the display as well as the American
date format (month first, then the day).
7.1.3 Day-of-the week language
• Press the MAXMIN/+ or RCC/- button in the setting mode to select between the day-of-the week lan-
guage: GERMAN, ENGLISH, FRENCH, SPANISH, ITALIAN and DUTCH.
7.1.4 Temperature display setting
• Press the MAXMIN/+ or RCC/- button in the setting mode to select the temperature display in °C
(Celsius) or °F (Fahrenheit) as temperature unit.
7.2 Trend arrows
• The trend arrows indicate whether the temperature and humidity values are currently increasing or
decreasing. If the arrows are steady, there is no change.
25