Epson UB-U06 Manual De Usuario página 2

Introduction
This manual describes how to replace the currently installed UB-BOARD with a UB-U06 board in TM
series printers designed for this board.
About the Symbol in This Manual
Cautions must be observed to avoid minor injury to yourself or damage to your equipment.
Precautions
Disconnect the power supply from the printer before you remove or install a UB-U06; otherwise you may
damage the UB-U06 and the printer. You must disconnect the power supply because the electrical
current is flowing in some parts of the printer circuit even when the power switch is turned off.
Wear a grounded wrist strap when handling the UB-U06 to prevent damage from static electricity.
To avoid contamination, do not touch the UB-U06 connector.
Operation Environments and Models
Operation Environments
Hardware:
OS:
Software:
*1: Even if the above operation environments are satisfied, your system may not
work properly, depending on the devices connected to your system.
Supported printers:
There is limitation of the printers that can be used with the UB-U06. Please ask your dealer
for the printer information.
Unpacking
Make sure you have these items. If any item is missing or damaged, please contact your dealer for
assistance.
❏UB-U06
CAUTION:
CAUTION:
*1
:
USB Plus Power compliant PC
Windows 98 (Second Edition is recommended.) or later
You need device driver if you use the UB-U06.
Please ask your dealer how to get the device driver for the
UB-U06 and how to install it.
❏Manuals
User's Manual
2