.. Cleaning the appliance for the fi rst time
Pull the door handle to open the microwave door.
In order to remove the dust residue from the packaging and any other possible
residues from the manufacturing process, wipe out the cooking compartment
and the inner side of the viewing window (10) with a slightly damp, soft cloth
before using the appliance for the first time. Ensure that no liquids penetrate the
microwave and dry the surfaces completely afterwards.
Clean the glass turntable (4) and the rotary star (6) in warm water with a little
washing up liquid before drying off these parts completely.
.. Using accessories
Do not use the microwave without
properly installing the turntable plate
(4).
Check that the drive shaft (6) is
correctly inserted in the recess on the
base of the cooking compartment
and that its wings rest flat on the
base. If necessary, turn the shaft
until it drops down into its correct
position.
Place the roller ring (5) in the recess
in the cooking compartment and
then place the glass turntable
centrally on the drive shaft (6) (see
Fig. above) so that the webs of the
glass turntable lie between the wings
of the drive shaft.
116
Fig. 3 – Accessories
4
5
6