Thomas POWER PACK 1620C Modo De Empleo página 12

Water is coming out of the air expulsion openings of
the appliance during vacuuming:
• Is the float (figure K) blocked when vacuuming liquid and unable
to operate?
Sudden reduction in suction power
• Has the float stopped the flow of air? This can happen if the
appliance is standing at a slant or if the appliance falls over. Turn
off the vacuum cleaner – the float will fall back into place – the
appliance is ready for use again.
The motor does not function:
• Is there damage to the mains cable, plug or socket?
• Pull out the plug before checking.
• Never open the motor yourself!
For the sake of the environment
Do not just throw away packaging material and worn out appliances!
Appliance packaging:
• The packaging carton can be placed in the waste paper collection bin
• The plastic bag made of polyethylene (PE) should be placed in the
appropriate disposal bin for recycling.
Appliance disposal at the end of service life:
• Appliance disposal in accordance with the local regulations but
before doing so disconnect and cut off the mains plug.
The symbol on the respective product or its packaging
indicates that this product must not be disposed of as
household waste. Instead, it should be handed into the
collection point for recycling electrical and electronic equipment.
By ensuring the proper disposal of this product, you will help to pre-
vent potential adverse consequences for the environment and human
health, which could otherwise be caused by inappropriate disposal of
this product.
For more explicit information about recycling of this product, please
contact your local town hall, your household waste disposal service or
the shop where you purchased the product.
12
Customer Service
Ask your dealer for the address or telephone number of your nearest
THOMAS Customer Service.
Specify your model number and type when contacting your dealer –
you will find these details on the rating plate.
To maintain the safety of your appliance, you should
have repairs, especially on live parts, carried out by a
trained electrician only. In the event of a fault, you should
therefore approach your dealer or the THOMAS Customer
Service directly.
Contact details are on the reverse side.