FRAME
EN
1 Unpack the stroller frame from the box
and place on floor. Pull storage latch out
to unlock frame.
2 Unfold the stroller by pulling the
Handlebar away from the frame and
pushing towards the floor until the
stroller clicks into place..
3 Place the stroller in the upright position.
WARNING: Ensure that all the locking
devices are engaged before use. To
check frame lock, push down firmly on
the handle..
FRONT WHEEL
4 Installation
• Lay stroller on its back so the
handlebar is resting on the floor.
• Attach the front wheels by sliding
them into the front wheel mounts
until it clicks. Gently pull on the front
wheels to make sure they are properly
attached.
WARNING: The front wheels cannot
be removed from the front wheel fork
assemblies. If the wheel becomes
damaged, please contact Baby Jogger
for a complete wheel assembly
replacement.
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount.
SWIVEL FEATURE
6 On back of front wheels, rotate swivel
lock into center position to unlock.
7 Rotate swivel lock to the side position to
lock.
WARNING:
• Do not engage or disengage the swivel
lock while the stroller is in motion.
REAR WHEELS
8 Installation
• Align the rear wheel axle with the
wheel mount on the stroller frame and
insert it into the wheel mount until it
locks into place. You will hear a click.
• Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount.
PARKING BRAKE
10 To lock the brakes: press the brake
pedal down to engage the brakes.
To release press brake down again.
WARNING: Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving.
CANOPY
11 Attach the canopy to the
frame: Slide the canopy side
mounts onto stroller canopy
mounts until it clicks into place.
NOTE: Make sure the fabric is out
of the of the canopy mounts.
12 Zip canopy to back of seat..
13 Remove the canopy: Unzip the canopy
from the back of the seat.
14 Pull up on canopy side mounts to
remove from stroller canopy mounts.
15 Pull forward to open canopy and push
backwards to close canopy.
16 To use the canopy window, fold shade
up and secure with magnets.
17 To use visor, pull visor out from under
canopy end..
12