Haier I-MASTER 5 Serie Manual De Usuario página 9

6. Turn the personal cup upside down with the
personal cup blade base on the top, remove
the personal blender's blade and attach the
lid of the personal cup. Then you can enjoy
using the personal cup. [Fig. 15,16]
Measuring cup
Add ingredients to the glass jug by using the
measuring cup. DO NOT add ingredients past the
MAX line on the jug.
2-in-1 spatula and tamper [Fig. 17]
Using your tamper: When product is switched on,
remove the measuring cup and insert the tamper
into the measuring cup holder. Press it down lightly
on the food to enhance the smoothness. [Fig. 17a]
Using your spatula: It can help to remove the
sticky ingredients on the glass jug walls. Make sure
product is switched off. [Fig. 17b]
Caution: Do not store the liquid or food in the
personal cup for more than 2 hours.
5. Cleaning & Maintenance
• Before you clean the appliance, unplug it.
• The cutting edges are sharp. Be careful
when you clean the blade unit.
• Make sure that the cutting edges of the
blade do not come into contact with hard
objects. This may cause the blades to get
blunt.
• Clean the main body with a moist cloth.
• Clean the other parts in hot water (<70°C
/158F°) with some washing-up liquid or in a
dishwasher.
Cord storage
The cord can be stored in the main body which can
be pushed in for storage and pulled out for use.
Cleaning [Fig. 18,19,20,21]
1. Use the auto clean function to clean the
glass jug or personal cup immediately after
use.
Glass jug: Fill up 1 L of hot water(<70°C/158
°F) along with 1 or 2 drops of washing up
liquid.
Personal cup: Fill up the half cup of hot
water(<70°C/158 °F) along with 1 drop of
washing up liquid.
An excess of washing up liquid creates
more foam and consequently can lead to
overflowing.
2. The following parts/tools can be dishwasher
cleaned: [Fig. 22]
• Measuring cup
• Lid of multi-serve jug
• Glass jug
• Multi-serve jug's blade
• Personal cup's blade
• Personal cup
• Lid of Personal cup
• 2-in-1 spatula and tamper
It is recommended to disassemble all the
components following the indication chart
before to washing in the dishwasher.
6. Troubleshooting
The appliance is not working.
Cause: The main plug of the power cord is not
plugged in.
Solution:
• Connect the appliance to the power supply.
• The circuit breaker in the fuse box has
tripped.
• Set the rotary switch to standby mode .
• Place the blender jug onto the main unit
and rotate in a clockwise direction until it
locks into place.
Appliance has a humming sound.
Cause: The blade is blocked or stiff.
Solution:
• Set the rotary switch to standby mode and
unplug the appliance.
• Remove the blockage.
Appliance switches off during use.
Cause: Processing quantity is too great or
processing time was too long.
Solution:
• Reduce the processing quantity. Make sure
the pieces of ingredients not larger than 2
x 2 x 2 cm.
• Set the rotary switch to standby mode .
Allow the appliance to cool down to room
temperature.
Liquid is leaking from the blade base
Cause: Seal is missing or not properly assembled
from the blade base.
Solution:
• Insert or reassemble the seal.
9
GB