Descargar Imprimir esta página

Snap-On CTC596 Traducción De Las Instrucciones Originales página 6

Cargador de baterías/ batería

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Symbology
SYMBOLOGY
REFER TO INSTRUCTION
MANUAL/BOOKLET
WEAR EYE PROTECTION
SEMKO
VOLTS
DIRECT CURRENT
CE MARK
CANADIAN - UNITED STATES
UNDERWRITERS LABORATORY
PROPERLY RECYCLE BATTERY
DO NOT THROW IN GARBAGE
Specifications
Battery Pack Specifi cations
Type
CTB5172/CTB5196 ..................... Nickel-cadmium
Voltage
CTB5172 ..................................................7.2 VDC
CTB5196 ..................................................9.6 VDC
Weight
CTB5172 .................................. .0.37 lbs (0.17 kg)
CTB5196 .................................. .0.51 lbs (0.23 kg)
Charge Time
CTB5172 ....................................................55 min
CTB5196 ....................................................90 min
Life
CTB5172/CTB5196 ............................ 1000 cycles
Note: 1 cycle=1 charge and 1 discharge
Discharge Temperature Range
CTB5172/CTB5196 ...............................................
................................. -4°F(-20°C) to 140°F(60°C)
ZCTC596CE Rev B
Battery Charger Specifi cations
Input
CTC596 ....................................120 VAC, 50/60 Hz
CTCA596/CTCE596/CTCU596 ...............................
......................................... 220-240VAC, 50/60 Hz
CTCJ596 .................................. 100VAC, 50/60 Hz
Output
All Models .....................................................0.6 A
Weight
All Models ................................... 1.3 lbs (0.59 kg)
Charging Temperature Range
CTB5172/CTB5196 ...... 32°F(0°C) to 113°F(45°C)
Figure 1: Inserting the Battery Pack into the Charger
Battery Charging
1. Before charging, give the battery pack sufficient time
to cool down after use.
2. Insert charger plug into the power source.
3. Insert battery pack in charger. Press lightly on battery
pack until it stops and red indicator light comes on.
The red indicator on the charger "blinks", indicating
that the charger is checking the battery pack.
— The charger will not fast charge a battery if the
battery pack is too hot or too cold. The charger
goes into a fast charge mode when battery
temperature is between 32°F (0°C) and 104°F
(40°C). During a fast charge, the red light
stops blinking and remains solid red.
4. During a fast charge, the red charger indicator light
illuminates. Standard fast charging time is one hour.
— When the fast charge is complete, it
automatically turns off to prevent an
over-charge and the green indicator light
illuminates.
— The green light indicates a maintenance
charge. When the green charger light
illuminates, a "trickle charge" current feeds the
battery to maintain a full charge.
— NOTE: Charger may take longer than one hour
the first few charge cycles and then stabilize to
be approaching one hour
6
(09/14)

Publicidad

loading

Este manual también es adecuado para:

Ctb5196