Publicidad
Idiomas disponibles
Idiomas disponibles
3
. Ensure that there is no danger of explosion (AD) in the room. . Make sure the environment is suitable
for the power supply cable provided. The cable of the appliance is H05 VVF, designed for internal use.
5
. Insert the plug in the socket (do not use three-way adapters and reduction adapters).
I
equipment has been transported or stored overturned, let is rest in its correct position for at least 3 hours
before hooking it up to the mains.
UK
8. OPERATIONS AND ADJUSTMENT (see figure 10).
D
!
CAUTION: Before placing goods ensure that:
E
1.
the plug is connected; . cover is open; .
F
4
the limits. . Remove any obstructions in front of the float hole.
6.
correct.
Keep the machine away from inflammable material or any danger of explosion (see figure 3).
NL
9. CLEANING OF THE BAIN-MARIE BASIN
P
1
. Turn off the power switch and pull the plug out of its socket. . Open the tap on the rear side of the
3
machine. . Clean the basin walls with a sponge dipped in water and sodium bicarbonate. . Carefully dry
S
each item with a dry, clean cloth. . Turn the tap off and reconnect the appliance to the power supply.
DK
FIN
B
GR
CZ
EE
LV
LT
10. FILTER CLEANING
H
1.
Switch off the appliance and remove the plug from the wall.
support. (See picture 6).
M
the electricity supply.
PL
SK
SLO
Operator's guide
2
3
IMPORTANT:
5
)
(
+
OFF
=
3.
Remove the dust with a vacuum cleaner. . Replace the filter and switch on
4
water level in the bain-marie basin is within
5.
Check that the set temperature is
2
2.
Remove the filter pulling it out from the
4
8
N.B.:
if the
4
H2O
Publicidad
