Descargar Imprimir esta página

Snap-On CDRS761 Traducción De Las Instrucciones Originales página 6

Taladro recto inalámbrico/ destornillador recto inalámbrico

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
Risk of fire.
• Do not attempt to disassemble the battery or remove
any component projecting from the battery terminals.
• Prior to recycling, protect exposed terminals with
heavy insulating tape to prevent shorting.
Fire can cause injury.
Battery Charger Safety
Messages
Risk of electric shock and fire.
• Do not insert battery pack into charger if case is cracked
or damaged.
Electric shock and fire can cause injury.
• To reduce the risk of electric shock, this power cord (for
USA version) has a polarized plug, (one blade is wider
than the other.) This plug will fit in on a polarized outlet
only one way. If the plug does not fit fully into the outlet,
reverse the plug; if it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change
the plug in any way.
• Use the CTC772A/CTCA772A/CTCEU772A/CTCJ772A
charger
only
with
rechargeable battery packs; Charging of any other
types of batteries may cause batteries to burst, causing
injury and damage.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
• Never attempt to connect two chargers together.
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting
charger.
• Be sure the cord is not stepped on, tripped over,
damaged, or stressed.
Risk of explosion.
• Wear safety goggles, user and bystander.
Explosion can cause eye injury.
Improper use of power tools and accessories can
cause broken tools.
• Before using charger, read all instructions and
cautionary markings on the charger, battery, and
product using battery.
Broken tools can cause injury.
ZCDRS761CE Rev. B
the
CTB8172BK/CTB8174
IMPORTANT
SAFETY
INSTRUCTIONS
Risk of electric shock and fire.
DANGER
—TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
1. This manual contains important safety and operating
instructions for the Snap-on CTC772A/CTCA772A/
CTCEU772A/CTCJ772A Charger.
2. Before using battery charger, read all instructions and
cautionary markings on battery charger, battery, and
product using battery.
CAUTION
3.
—To reduce risk of injury, charge only
CTB8172BK/CTB8174 type rechargeable batteries.
Other types of batteries may burst causing personal
injury and damage.
4. Do not expose charger to rain, moisture, or snow.
5. Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of
fire, electric shock, or injury to persons.
6. To reduce the risk of damage to cord, pull by the plug
rather than the cord when disconnecting the charger.
7. Make sure cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or
stress.
8. Do not operate the charger with damaged cord -
replace it immediately.
— Cord replacement for CTC772A/CTCA772A/
CTCEU772A/CTCJ772A charger must be done
with an identical cord.
9. Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take
it to a qualified service person.
10. Do not disassemble charger; take it to a qualified
service person when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
11. To reduce risk of electric shock, unplug charger before
attempting any maintenance or cleaning. Turning off
controls will not reduce this risk.
12. The appliance can be used by children aged from 16
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
6
(04/19)

Publicidad

loading

Este manual también es adecuado para:

Ctss761