Environment Protection - Bosch DLR130 Instrucciones De Funcionamiento Y Seguridad

BM 2609140584 02-09:BM 2609140573 02-09 2/2/09 8:45 AM Page 6
DO NOT place the laser tool in a position that
may cause anyone to stare into the laser
beam intentionally or unintentionally. Serious
eye injury could result.
DO NOT use any optical tools such as, but not
limited to, telescopes or transits to view the
laser beam. Serious eye injury could result.
ALWAYS remove the batteries when cleaning
the laser light aperture or laser lens.
DO NOT operate the laser tool around
children or allow children to operate the laser
tool. Serious eye injury could result.
ALWAYS turn the laser tool "OFF" when not
in use. Leaving the laser tool "ON" increases
the risk of someone inadvertently staring into
the laser beam.
DO NOT operate the laser tool in combustible
areas such as in the presence of flammable
liquids, gases or dust.
ALWAYS position the laser tool securely.
Damage to the laser tool and/or serious injury
to the user could result if the laser tool falls.
WARNING: Batteries can explode or leak,
and can cause injury or fire. To reduce this
risk:
ALWAYS follow all instructions and warnings
on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace
all of them at the same time with new batteries
of the same brand and type.
Recycle raw materials & batteries instead of disposing of waste. The unit, accessories,
packaging & used batteries should be sorted for environmentally friendly recycling in accordance
with the latest regulations.
Electrical Safety Procedures

Environment Protection

-6-
ALWAYS use only the accessories that are
recommended by the manufacturer of your
laser tool. Use of accessories that have been
designed for use with other laser tools could
result in serious injury.
DO NOT use this laser tool for any purpose
other than those outlined in this manual. This
could result in serious injury.
DO NOT leave laser tool "ON" unattended in
any operating mode.
ALWAYS repair and servicing must be
performed by a qualified repair facility. Repairs
performed by unqualified personnel could
result in serious injury.
DO NOT disassemble the laser tool. There
are no user serviceable parts inside.
Disassembling the laser will void all warranties
on the product. Do not modify the product in
any way. Modifying the laser tool may result in
hazardous laser radiation exposure.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fire.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be
used for several months.