Descargar Imprimir esta página

Orbegozo CM 2360 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

CM 2360
cause serious burns. Do not touch the appliance while it
is switched on. Use the handles to move or adjust its
position.
• Do not let the mains cord hang over the edge of the table
or worktop on which the appliance stands.
• Keep the mains cord away from hot surfaces.
• Do not let the appliance operate unattended.
• Put the appliance on a flat, stable surface with sufficient
free space around it.
• Let the appliance cool down completely before you
remove the cooking plates, clean the appliance or put it
away.
• Put the unit down onto a heat-resistant surface or mat.
• In order to prevent heat from building up, do not put the
unit directly underneath a cupboard. Ensure that there is
enough space all around.
BEFORE THE FIRST USE
- Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the
device.
- Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use
abrasive products.
- Place the appliance on a stable surface and make sure there is 10 cm. free of space around the appliance.
- NOTE: It is normal that strange odor comes out from the unit for the first use. This will cause after a short
while.
DESCRIPTION
1. Non-stick cooking surface
2. Temperature selector
3. ON/OFF light (red)
4. Ready light (green)
5. Base
6. Cord storage (in the bottom side)
USE
- Connect the power cable to the socket. (Note: Make
sure the indicated voltage on the device matches the
local voltage before connecting the device. Voltage 220V-240V ~ 50Hz).
9

Publicidad

loading